Recent Water Damage Posts

4 Reasons You Should Avoid Using Drain Cleaners

5/12/2022 (Permalink)

4 Reasons to Consider an Alternative Clog-Clearing Strategy

An obstruction inside your home’s plumbing system can cause slow drains or overflowing toilets that mandate a prompt sewage cleaning. When you need to fix a clogged drain or pipe, you may have a variety of tools at your disposal, including auger snakes, plungers and chemical solutions. While utilizing drain cleaner may seem like the easiest option, it may ultimately be the worst choice. There are four specific reasons why you should consider an alternative clog-clearing strategy.

1. Warped Plastic

Typically, chemical cleansers breakdown obstructions by producing heat. This reaction can warp plastic pipes, increasing the potential for leaks and subsequent water damage.

2. Corroded Metal

Drain cleaners can also wreak havoc on metal plumbing lines. If the pipe is completely blocked, chemicals may have little effect on the clog. As a result, the solution may sit inside the tube for an extended period, potentially resulting in detrimental corrosion.

3. Shifted Obstructions

Residue from fats, oils and grease can buildup over time and contribute to a clogged drain. Addressing this problem with chemicals can create future issues. For example, instead of dissolving the obstruction, the solution may simply shift debris further down the line. This, in turn, can result in a significant blockage that may require professional attention.

4. Toxic Formula

In addition to potentially damaging pipes, drain cleaner can also present hazards to humans and wildlife. You may suffer chemical burns if the cleanser touches your skin. Fumes may also irritate your eyes and throat. The solution’s composition can also poison any animal that ingests it.

Performing a sewage cleaning and addressing a clogged drain can be unpleasant experiences for any homeowner in Maple Grove, MN Attempting to correct the problem with hazardous chemical solutions can cause additional problems that may eventually destroy components of your home's plumbing system. To help prevent accidental injuries and minimize the risks of leaks and significant water damage, you should employ non-caustic tools to clear obstructions.

What to do When a Pipe Breaks

5/12/2022 (Permalink)

A pipe break calls for fast action. Mitigation, repair, and restoration are critical to limit the extent of primary and secondary damage. The following measures can help homeowners minimize the severity of water damage caused by bursting pipes.

Limit Damage

Water originating from a broken supply line is likely to be clean and treated. Limit damage by:

  • Shutting off the water main
  • Collecting water in a trash can with wheels or other containers
  • Puncturing a swollen ceiling and draining water into a container

These methods can limit the amount of damage sustained by a ceiling, wall cavity or home interior.

Avoid Electrical Hazards

Homeowners should steer clear of other hazards between stopping and fixing a leak. Avoid making contact with nearby:

  • Plugged-in appliances
  • Electrical fixtures
  • Wiring

A homeowner can shut off the power at a breaker box. If you are not sure about the safety of this measure, contact an electrician or power company.

Contact a Plumber

Call a plumber to fix broken pipe. Keep the water supply turned off and continue collecting residual water until the plumber arrives. A homeowner may use:

  • Mops
  • Towels
  • Wet-Vac

Remove as much water as possible to limit the extent of the damage. Residential damage mitigation experts can complete this process with professional equipment.

Dry the Area

Depending on the extent of damage caused by bursting pipes, a homeowner may want to contact a mitigation and restoration service. Promoting fast drying is crucial. Specialists recommend using:

  • Air movers
  • Fans
  • Dehumidifiers

This equipment can shorten drying times and prevent mold growth. If you do not have access to these appliances, hire a damage mitigation service.

Homeowners should act quickly in response to a broken pipe at a residence in Maple Grove, MN Water damage mitigation and restoration professionals can clean up damage caused by bursting pipes in a timely manner and prevent secondary damage from occurring.

Can You Keep Water-Damaged Carpet?

5/12/2022 (Permalink)

Carpet is porous and may pose a challenge in the event of water damage. If this flooring material has been exposed to water from a pipe break, leak, or flood, you may be wondering whether it should be restored or replaced. Here are three considerations to help you make the right decision.

1. Which Type of Water Caused the Damage

Category One water is clean and treated. This is the type of water released in the event of a supply pipe break. Carpeting soaked with clean water may be able to be restored. Take action as soon as you notice the leak to reduce the amount of water to which flooring is exposed and the amount of time it remains saturated. Carpeting exposed to Category Two water, which may contain chemicals and microbes, or Category Three black water containing solid waste should be replaced.

2. How Long Was the Carpeting Exposed to Water?

Mold can start to develop within 24 to 72 hours of exposure to water. Fungi thrive in damp conditions such as those created by carpeting. Even if mold does not develop on the surface, moisture can permeate to the subfloor where conditions are ideal for mold spores to thrive. Carpeting exposed to water for a prolonged period of time poses a mold risk and should be torn up.

3. Which Method Is Most Cost-Effective?

If carpeting will require extensive cleaning, you should determine whether it is less expensive to attempt to restore or replace the flooring. Also consider whether keeping carpeting exposed to water may increase the possibility of mold, which will require mitigation.

Certified water damage restoration experts can recommend the best approach for dealing with wet carpet in your home. These companies have equipment that can make cleaning and drying water damage from a pipe break, flood, or leak easier and faster.

What to Know About Water Heaters

5/12/2022 (Permalink)

You can thank your water heater for the hot water that fuels your dishwashers, showers, and baths. These appliances are in almost every household and are used to heat up cold water that runs through the pipes. However, many homeowners don’t maintain their heaters as well as they should, which can increase the risk of water damage. Here are a few tips about this helpful appliance.


What Your Water Heater Does


The large cylinder contains a heating mechanism that heats the water inside. The water goes through a pipe within the machine and is heated. The heater is a great insulator, so the heat remains inside the cylinder and doesn’t escape into the air. The heated water within the appliance moves through the pipes to your faucet on demand.


Why The Heater Should Be Maintained


These appliances are large and full of water, so they can be a big hazard. Most steel tanks are glass-lined to prevent damage and leakage, but this doesn’t mean that problems can’t occur. If the heater suffers from a hole or piercing, it should be replaced quickly.


There are a few ways that these appliances can be damaged:


• High pressure
• Large sediment build-up
• Rust


These issues can cause a lot of damage and might require you to get professional water damage repair.


How To Take Care of Your Water Heater


It’s important to take care of your home by keeping an eye on your appliance. One of the best ways to maintain your heater is to flush it often.


To do this, first drain away the water. Once all the water has left the appliance through the pipes, refill it up halfway with cold water. Access the water heater flush panel to clear away sediment and fill up the heater with fresh water. This can help prevent blockage and reduce high pressure.
Periodically inspect your water heater and look for any signs of damage or build-up. By doing this, you can reduce the risk of water damage.

3 Don't of Dealing With a Flooded Home

5/12/2022 (Permalink)

When flood water invades your home, it can be frightening for anyone who lives there. Floods that build because of rainstorms might be especially troubling because it can be difficult to control the flow of water. While you may want to try and minimize any damage caused by flooding, this may do more harm than good. When flooding occurs, there are a few ways you can stay safe and avoid further damage to your home.

1. Don’t Enter Flooded Areas

You might want to rescue important or treasured items once your home floods, but doing so might be dangerous. Even indoor flood water can rise quickly and trap you before you realize the danger. It is better to get yourself and your family to safety and call in a flood damage and restoration service to drain away the water and retrieve your belongings, even if the flooding is not severe.

2. Don’t Turn off Any Electrical Services

Electrical and fuse panels might pose a serious risk of electric shock once they take on water damage. Even if you wear rubber gloves and boots, they might not protect you completely. Seal off rooms where any electrical systems are present and avoid trying to operate light switches or affected appliances.

3. Don’t Touch Contaminated Water Without Protection

If you must enter your flooded home and wade through water from overflowing creeks or streams, it is wise to protect yourself with rubber gloves, long boots and a face mask, as this type of water is usually contaminated. Urine, feces and other sewage runoff may be present, even if the water is not visibly dirty. It is best to allow flood professionals to handle and remove it.

Flood water can invade your Maple Grove, MN home without warning during torrential rainstorms. Knowing how to keep yourself and your family safe and what to avoid may help you ride out any natural disaster, no matter what type of weather causes it.

How to Restore a Home or Business After a Flood

5/12/2022 (Permalink)

When the floods invade a home, the success of the restoration and repair work depends on the expertise of your home renovation contractor. Home water damage can affect the dry wall, and you need to know the materials you need to remove before you create a home restoration and flood mitigation budget. Modern homes have a vast range of materials that can be damaged by the floods.

Since most people value the visual aesthetics more than the durability of these finishes, the damage could be significant. Water cleanup will help you to undertake a professional analysis of the water damage before you embark on the restoration. When undertaking the renovation process, be sure to replace the fragile materials with durable options such as concrete and stone walls. While wood floors might appear beautiful, wood is susceptible to flood damage. If you do not address the problem soon, you might have to replace the entire floor.

Keeping the Home Dry

Drying a home after water damage is a crucial step toward combating the mold development. Wood can warp, swell, and start rotting after a few days. Since the natural stone is durable, it will only require a wire brush to restore its original glow. If you live in a flood-prone area, choose your building materials wisely. Drying the water in business terraces can reduce flood damage and contribute to the mitigation and control of mold development. Also, you should rethink the home design. The designs that allow water to pass under the crawlspaces can protect your home from floods. The secret is to raise the floor above the flood level to prevent such damage. Floods can also promote the mold damage as a result of the damp conditions. Water in business parking lots should flow to the main drainage systems or retention basins tom prevent flooding problems. Home restoration after the flood damage can be a costly venture, but you can cut the costs if you take the necessary flood mitigation procedures seriously. Water in home indoor areas can be difficult to remove since the damp conditions will persist for a while.

Backflow Valves

The best way to ensure that the water in home trenches does not find its way into the home is to install some backflow valves. The key to preventing the damp conditions is to waterproof your home, repair the cracks, inspect the roof, and monitor the plumbing system. Flood mitigation involves replacing the fragile materials with durable and resilient options. While drying the home is a key step when it comes to combating the water damage, you need to remove the molds as well. Homeowners should also inspect their drainage systems to look out for blockages that might curtail the flow of storm water during a flood. All water in business roofs should flow into the gutters without leakages that might cause some flooding problems. During the water cleanup, you should take a holistic approach where you dry the home, combat the mold, and mitigate the damage. After the thorough water cleanup, be sure to dry the home before you embark on the refinishing process.

Water in Home Drains Can Spread Mold

Flood mitigation can help you to save on water cleanup, drying, and restoration. Installing the backflow valves is another way to prevent water from flowing back into your home during a heavy storm. Flood damage comes in many forms, but the severity of the problem depends on the magnitude of the floods. Backflow valves also come in handy in the sewer since they prevent the sewerage from going back to the house. You can reduce the degree of water damage by drying the house as soon as possible. The water in home gardens should not get inside the buildings. The drains can also spread the spores throughout the home. The water in business drainage systems should not flow backwards, and backflow valves come in handy in such a scenario.

Visit https://www.SERVPROmaplegrovecorcoran.com/ for more information on water damage restoration.

The Awful Truth About Water Damage

5/12/2022 (Permalink)

Few things can send shivers of fear down the spine of a homeowner like the words ‘water damage’. Most people can imagine the horrors water cleanup entails, but few have experienced water damage from a leaky roof, pipe burst, or storm flood. Water can damage personal possessions, destroy flooring, and ruin walls. Worrying about costs to repair or restore the water-soaked area can be overwhelming, and the loss of treasured keepsakes can be heartbreaking.

Calm Attention

It can be difficult to remain calm as you walk through a foot of flooding water inside your home, but the key to dealing efficiently with the situation can be as simple as remaining unruffled. In the first few minutes after discovering the water, consider the following steps:

• Take pictures of the damaged area.
• Phone your insurance agent to report the situation.
• Contact a water restoration and repair team.


These simple actions can help immensely when you file your insurance claim.

Prompt Action

Standing water can do a great deal of destruction, so the longer you wait to remove the liquid the more damage the water can do. As it sits, the liquid can continue to seep into walls, drip into lower areas of the home, and soak into furniture. Whether the damage is from a pipe burst or a broken water line, the water repair and restoration team can quickly remove the standing water and prevent additional damage.

Interminable Repairs

Once the standing water is gone, the repairs can begin. The process may seem endless; however, the restoration team can use dehumidifiers and industrial fans to quickly dry your home and prevent mold. After a check of the walls to ensure the area inside is dry, the restoration team can move to examining the structural integrity of the building. If areas of concern are found, the team can begin repairs, and the restoration of your home can soon be completed.

Rapid Recovery

Once flood water from a pipe burst is discovered, prompt action can be crucial. Ask the restoration team for tips on drying out personal possessions and begin the road to a rapid recovery.

A Quick Guide to Preventing Home Water Damage

5/12/2022 (Permalink)

Water damage is one of the costliest disasters a homeowner can experience. When water floods home basements, bathrooms, or crawl spaces, there is also the potential for personal property damage, mold, and structural integrity issues. You can safeguard your residence against many types of damage caused by water in your home with a few preventative steps.

Plumbing

Although you probably use plumbing each day, you may forget to check your pipes and appliances regularly. Here is some practical advice on preventing plumbing problems in Maple Grove, MN

• Inspect tubs and showers for cracks and caulking issues.
• Check appliances for loose hoses and damaged hose washers.
• Monitor faucet water pressure for a potential broken pipe.
• Know where the water shut-off valve is and make sure it works properly.
• Do a pipe cleanup by removing any buildup. Also, check heating, cooling, and plumbing pipes for cracks or leaks.

Basement

Water seepage often occurs in basement structures, and it is a major issue. Ground water can cause serious damage, but you can prevent most potential water damage by resealing your basement at the first sign of seepage after a heavy rain. Also, consider installing a backwater regulator valve to prevent sewer problems.

Outdoors

Inspecting your roof can prevent unwanted water from leaking into attics and damaging ceilings. If windows are missing caulk, reseal the panes to prevent rain damage. Also, take time to inspect gutters as you clean them of debris, because they can easily allow unwanted water to damage your property.

Assets

At the first sign of flood water in your home, consider calling a specialist in remediation. The cleanup specialists can help protect your possessions by removing the water, drying the area, and setting up a dehumidifier. They can also disinfect the property to prevent mold growth.

Prevention

You may not be able to avoid all damage by water in your home, but you can prevent many potential flooding issues. By taking the preventative steps listed above, you can help safeguard your property from water damage.

Why You Need Professional Water Damage Restoration

5/12/2022 (Permalink)

Why You Need Professional Water Damage Restoration

Water damage is an important aspect to focus on once water in a home or water in a business has gotten in. Many home and business owners don't focus enough on mitigation once there has been a pipe break, supply line break, or other catastrophes. As such, water damage worsens. This can be avoided by calling a professional restoration company.

Avoid Heavy Flood Damage

It's hard to deal with a lot of water inside of a flooded home or business. Many people are not equipped to deal with it on their own. By calling in restoration professionals, they will help with the water cleanup. Buildings that wait too long to schedule water cleanup end up with more damage.

The mitigation is done to ensure that there is not a significant amount of flood damage. Through water cleanup, it's easier to see what has actually been damaged. Whether there was a pipe break, a supply line break, or something else, the water has to be cleaned up. Without professional assistance, it could take weeks for the water to dissipate on its own.

Salvage Various Items

There might be furniture, drywall, and other things damaged from water. If there was a pipe break or supply line break, the flood damage will be focused on where the problem occurred. Regardless, the water in a home or water in a business has to be out. Drying will help to salvage some items.

Professional drying techniques will ensure that water cleanup is made easier. Some drywall, for example, could be saved if drying happens quickly. Without the drying, then it's more likely that the water will continue to soak into materials. The flooded home or business will then need to be gutted more extensively to remove any items that have suffered flood damage. This could include carpeting, drywall, flooring, cabinetry, and more.

Learn About What Needs to Be Done

A long list of things needs to be done when there is water in a home or water in a business. If there was a pipe break or supply line break, the plumbing needs to be repaired. It's also important that a restoration company uses sensors and leak detection equipment to locate all levels of water damage.

A restoration plan should be created to determine what needs to be done. The plan is different for everyone. Restoration professionals will work to oversee the flooded home or business so that everything gets fixed. If there was a lot of mitigation done, the water damage might not be that bad. If there was very little mitigation done, then there might be a lot of water in a home or water in a business to overcome.

Whatever the situation, professionals can work to see that a flooded home or business is repaired properly. The plan might be a time consuming one based on the level of damage and what needs to be restored.

Rebuild What Has Been Lost

A lot might have been lost. The good news is that when working with a professional restoration company, it's easier for a home or business to rebuild. There might be the need to remove a lot of damaged items, repair some items, and rebuild others.

The time it takes to rebuild could take days or even weeks depending on the level of damage. This will be part of what is determined within the restoration plan.

Regardless of why water entered a building, professional services are important. The right restoration company can make it easier to rebuild so it's as if the water damage never even happened.

How to Handle Water Damage and Flood Damage

5/12/2022 (Permalink)

Getting the Most Out of Professional Water Damage Restoration

Water damage is incredibly common, as it effects millions of homes across the country every year. This could be due to flood damage from living near a body of water or from a simple pipe break or supply line break. No matter what the cause, it is important that you hire a restoration company as soon as possible to get proper mitigation done. Having drying and water cleanup done by the experts is well worth what you spend on it.

How to Handle Water Damage and Flood Damage

If you have a flooded home and are dealing with extensive flood damage and water damage, it's essential that you call a restoration company. The restoration company and mitigation experts are there to handle the water damage for you if you have had water in your home or water in the business that you currently own. They do all of the restoration and drying for you so that you're not left doing it yourself.

Mitigation and Restoration from an Expert Restoration Company

Restoration involves quite a few steps, so it is important to realize that the mitigation experts will come to handle the water damage for a few weeks before it is finally gone for good. This involves all of the drying and restoration that needs to be done in your flooded home. Flood damage is difficult to deal with yourself, so it is always a good idea to hire a company that specifically does water cleanup for you.

Why You Need to Work with the Mitigation Pros

Water cleanup might seem easy enough, but it is actually quite difficult and can be problematic if you have been having issues with drying the area. Your flooded home can get much worse if it is left to absorb into carpeting and any flooring that you might have. To prevent this from happening, call in the pros as soon as you notice any water in the home or if you currently have some water in your business. They will also be able to check for a pipe break or supply line break if this is something that has been an issue for you. Water cleanup can also be quite affordable, especially if you have some type of insurance.

What to Do if You Have a Flooded Home

The first thing for you to do if you have water in your business office or have noticed water in the home that you live in is to call the pros. You are also going to want to check for a supply line break or a pipe break that might mean there is a bigger problem for you to deal with. If you notice a pipe break, be sure to call in a plumber who is going to be the one to fix it for you. If there is a large supply line break, you may need to call in the experts locally with whom you get your water from.

Handling Water in Your Home or Water in a Business Area

Once you notice any type of water, it is important to act quick and do what you need to do. The problem that a lot of people face is that they do not know the first thing about getting the water damage handled on their own, and so they are left with a significant amount of problems that they will find to be an issue at home or in the office. You will also find that there are tons of experts out there who are more than willing to take you on as a client so that your home or office can go back to normal without any problems. There are a lot of people dealing with these problems, so be sure to call in the experts as soon as you notice you have some type of standing water.

Sewage Cleanup: More Than Just a Dirty Job

5/11/2022 (Permalink)

If your Maple Grove, MN home gets infiltrated with sewage water, it’s much more than just cleaning up a spill. Sewer cleanup requires more consideration and steps to clean. Unlike a pipe burst or appliance malfunction, which results in clean or gray water in the home, a sewer backup contains highly contaminated black water.

Safety First

Even a flooded toilet has the potential to include black water. While the first inclination may be to grab some towels and start mopping it up, doing so could spread contaminants. Hiring a professional water remediation expert can ensure that the process is done correctly and nothing is left behind. Signs you should avoid the mess and call for help include:

  • Multiple rooms are flooded.
  • The source is clearly from a sewer or septic tank backup.
  • The water has been sitting for more than 24 hours.

Besides cleaning up the mess, a professional with have the tools and knowledge to ensure a proper, efficient cleanup. The right team will quickly remove sewage dirt, prevent mold or other bacteria from spreading, and are better equipped to salvage more of your personal belongings, as well as components of the home.

Small Spills
For minor issues, it is important to take precautions when tackling sewer cleanup on your own. Before starting the process, open windows to air the home out. Wear PPE, including eye protection, rubber gloves and disposable clothing. Any solids should be shoveled and placed in heavy-duty plastic bags for removal. A bucket can be used to remove standing water, and a wet/dry vacuum can finish off the remaining water. Any items that can be removed should be placed outdoors to dry out. All areas or items that have been affected should be thoroughly cleaned with a disinfectant.
When it comes to sewer cleanup, the best bet is to get expert help to avoid unnecessary risks. They will quickly restore your home back to “Like it never even happened.”

How To Save Your Water-Damaged Belongings

5/11/2022 (Permalink)

  1. How To Save Your Water-Damaged Belongings

A broken pipe or natural disaster can lead to water in home. That water can damage your carpets, furniture and valuables.
Water damage repair specialists in Maple Grove, MN can perform dry cleaning to restore your belongings. Before they arrive, there are some steps you can take to care for your items.

Air Dry Inside When Possible

You may be tempted to bring all of your wet belongings outside so they can dry in the hot sun. However, certain items may buckle or split if they dry too quickly. You should instead let them air dry inside your house. Air-dryable items include leathers, organic materials, textiles and paintings. Be sure to remove any wet paintings from their frames and to keep them away from direct sunlight.

Prevent Mold Growth

Water in home does not just make your valuables wet. Moist environments can also lead to the growth of excess mold, which can cause further damage to your valuables. You can reduce the chances of mold growth by limiting the humidity in your home. That means utilizing air conditioners, open windows, dehumidifiers and fans to boost air flow. This can assist in the drying process, as well.

Rinse and Clean Wet Items

To remove the dirty flood waters from your belongings, rinse them off with a hose spray or clear water. Next, use a damp cloth or soft brush to remove debris and silt. Any metal objects should be rinsed and dried immediately. However, heavy mud can be left on larger metal items while they dry. Specialists can remove the caked mud later.

Preserve Books, Documents and Photos

Even these valuable items can be saved after a flood. You can carefully remove them from any frames or mats and place them in a refrigerator or freezer for preservation. Make sure to only use appliances that weren’t damaged by the water.
Water in home can seem devastating. Yet by following the above steps and calling your local restoration experts, you can get your house and belongings back to normal.

What to do if you Have a Water Damaged Light Fixture

5/11/2022 (Permalink)

Proper Precautions to Take When Addressing Water in Light Fixtures

When you think about water damage in your Maple Grove, MN home, you likely think about the affect it can have on the structure of your house. However, there is one location that you may not consider. In some cases, you may end up with water in light fixtures. This can be dangerous, so make sure to take proper precautions when addressing the situation.

1. Turn Off the Electricity

The first thing that you should do if you notice water in a light fixture is to turn off the power to your home. Trying to turn off the light with a switch could be unsafe, so do not attempt to do this. Instead, you should find your home’s breaker box and shut off power to the entire house.

2. Turn Off the Water Supply

If the water is coming from a broken or leaking pipe, the next step you should take is to turn off the water supply to your house. This will prevent additional water from entering the home and causing more damage.

3. Contact Your Insurance Company

In most cases, water damage will be covered by your homeowners insurance, so you should contact your agent quickly to file a claim. Unless the water came from a broken pipe or appliance due to your own negligence, your insurance company will likely pay for the resulting damage.

4. Hire a Professional to Replace the Fixture and Make Repairs

Because water and electricity is a dangerous combination, you should never attempt to make these repairs on your own. Contact an emergency restoration service to repair any floor and ceiling damage as well as the leak or broken pipe. An electrician should replace the light fixture before you attempt to use it again.

If you notice water in a light fixture, you should have this taken care of right away. Do not ignore it, as this can cause bigger problems and can be a hazard to your safety.

 

The Process of Professional Water Restoration

5/11/2022 (Permalink)

If you have water in home or water in business, it is imperative to act fast and get things under control. Many people are unaware of the appropriate steps to take when a flood damage occurs in their property.

An influx of water into your property can happen at any time and for any number of reasons. Water damage can occur due to a toilet overflow, a washing machine malfunction or a burst pipe. Regardless of the cause of the situation, excess water in home or water in business can have devastating impacts and result in costly damage very quickly.

A flood or water in home or water in business can destroy furniture, cause wood floors to rot, and damage belongings. In addition, flood or excess water or moisture can compromise or weaken the structural stability of your building. If the situation is not handled properly, a water or flood problem can quickly create a hazardous environment.

When water or flood damage occurs in your residential or commercial property, it is essential that you contact a qualified professional restoration service to handle the various aspects promptly and efficiently.

Benefits of hiring professional water cleanup service include:

Quick Response

A water damage is an urgent situation, and professionals understand that. Water cleanup experts respond quickly, in order to prevent further damage to the property and your belongings. They know how to handle emergency water or flood situations and can start restoration services right away.

They understand how chaotic the clean up and restoration process can be, and they strive to minimize your stress throughout the process. A water cleanup professional will give tips or recommendations on what you need to do while waiting for their arrival.

Inspection

There are a number of steps professionals usually take to get the affected area under control. First, they conduct an initial assessment of the affected area and determine the best approach to take. They will take thorough documentation to help you with your insurance claim process and can guide you in completing and sending the necessary documents and information to your insurance company.

Water Extraction

After inspection of the area, mitigation professionals will immediately begin the extraction process. They will use their advanced techniques to extract any standing water, moisture or sewage debris. They will move wet furniture and other belongings to a safe, dry area.

Cleaning And Drying

Water cleanup specialists have sophisticated testing equipment and infrared moisture detection cameras, which enable them to perform this task efficiently and effectively. They test the moisture level and look for appearance of mold or other dangerous microorganisms. Once the sanitization and disinfection of the area is completed and the area is fully prepped, they then start the drying process using powerful drying and dehumidification equipment.

State Of The Art Equipment

Water damage professional teams are fully equipped with high-tech equipment and tools for extracting water and doing flood damage control for homes and businesses. They have moisture detection equipment, large fans for drying, and the latest structural drying equipment.

These tools and equipment enable them to perform the task properly, removing water in home or water in business. Their use of powerful equipment helps bring a flooded home or commercial environment back to normal condition.

To learn more about water mitigation or flood damage restorations and the process involved in getting things back to normal in your home or business, you should contact a reliable and reputable restoration company or professional.

6 Steps to Flush Your Water Heater

5/11/2022 (Permalink)

How To Flush Your Water Heater

A regular part of maintenance on your home in Maple Grove, MN is periodic flushing of your water heater. It's a simple process, but taking safety precautions and making sure the water and sediment have a place to go are important. Water remediation experts recommend the following steps to avoid flooding your home.

1. Turn off Power

Before you begin the water heater flush, make sure all power is off. The pilot light on gas models should go out, and the circuit that supplies an electric model should be switched off.

2. Put on Gloves

As you may expect, water from the heater will be hot, so it's important to wear protective gear over your hands. Heavy duty work gloves protect you from getting burned.

3. Set up Drain Hose

Connect the hose you are using to the drain valve on your water heater. Place the other end of the hose in the area where you want the water and sediment to deposit.

4. Drain the Heater

Opening the drain valve allows water to flow through. You can turn on the hot water faucet in your kitchen to speed up the process. Flush it a couple of times to make sure all the sludge is gone and then close the valves to prepare to refill the heater.

5. Fill the Tank

Turn the water back on to fill the tank. You know it is filled when an open faucet goes from weak, to steady stream of water and no more air is coming out of the line.

6. Turn on Power

After confirming the tank is full, you can turn the power on without damaging the heater. Turning the power on lets the water inside it begin to heat up.

Your water heater needs regular care just like any other appliance in your home. Flushing the sediment out allows it to continue working efficiently.

Five Damage Tips for Water Cleanup

5/10/2022 (Permalink)

Water can cause extensive damage to a commercial building within a matter of hours. Standing water and residual moisture should be extracted and drying methods used to avoid secondary damage, such as mold growth. Here are five of the most important damage tips for mitigation and cleanup.

1. Extract Standing Water
Eliminating standing water with portable pumps or a wet vac is the first step toward addressing water damage. Water damage mitigation professionals can perform a fast and thorough extraction and provide cleaning tips for building materials and contents.
2. Increase Airflow
Restoration specialists may recommend the use of ventilation equipment such as air movers or fans to promote drying. Ventilation is an ideal drying method after a pipe burst introduces clean water into a structure. Areas exposed to contaminated water for long enough for mold to start forming may be an exception, as circulating air can spread spores.
3. Consider Heated Methods
Heat may be helpful for expediting drying in some situations. The degree of contamination, duration of damage, and affected materials are essential considerations for determining the best drying methods. Restoration experts can offer case-specific damage tips.
4. Lower Humidity Levels
Reducing residual moisture levels in the air and porous or semi-porous materials is helpful after any type of water damage. Mold needs moisture and food sources to flourish. A combination of cleaning, disinfecting, and lowering humidity discourages fungi from growing.
5. Wait Until Drying Is Complete
Rebuilding or restoration should not begin until the portion of a structure that has suffered water damage has been cleaned, disinfected, and thoroughly dried. This includes replacing any building materials torn out due to contamination.
Lowering moisture levels within 24 to 48 hours after water damage is essential for avoiding mold. Trained water damage professionals can quickly extract water and recommend the best damage tips.

See The Signs of Water Damage

5/10/2022 (Permalink)

Even the smallest water leak is capable of costing you thousands of dollars in repairs and remediation, but the earlier you catch the issue, the sooner and more efficiently it can be fixed. Lucky for you, SERVPRO is "Faster to Any Size Disaster."
There are many causes of a water leak, including but not limited to:

  • Pipe break
  • The freeze/thaw cycle
  • Broken seals
  • High water pressure
  • Clogged lines

But how do you know when you need to call your local Annandale, MN, water damage specialists?

1. Staining on Walls
Discoloration on walls or ceilings is one of the most common signs of water damage. Always look out for those mysterious-looking brown patches, and act fast if you spot one. Water staining doesn't develop overnight — the water may have been leaking for days or even weeks by the time the discoloration becomes perceptible.

2. Pricey Water Bills
If your water bill has been increasing even though your usage has remained about the same, you might be relieved to hear that this could be a sign of a pipe break or other water line malfunction. All that expensive water is going somewhere, and it's crucial to put a stop to it before it does too much damage.

3. Poor Water Pressure (or None at All!)
Another sign of a leaky pipe is a sudden change in your water pressure or no water coming out of the faucets at all. This is caused by the water draining out of the pipe break and not leaving enough water to be distributed to the rest of the system. If you encounter this issue, the water is likely gushing out in a place where you don't want it, so make sure to get help before it develops into a full-fledged flood.
By keeping an eye out for these three signs of a water leak, you might just be protecting your commercial building from a messy and costly disaster.

What Can Homeowners Do After a Water Intrusion to Help Clean up?

5/10/2022 (Permalink)

SERVPRO Provides Water Damage Repair in Maple Grove and beyond.

When a dishwasher hose breaks loose, and water comes pouring into your kitchen, it can cause extensive damage. We often get questions from homeowners asking us what they can do before we arrive. Many times, they attempt to recover the area themselves. That can lead to hidden damage such as mold.

What You Can Do Before We Arrive

You can use towels to soak up excess water. Furniture can be raised and put on blocks to avoid immediate damage. Your priority should be to call SERVPRO for water damage repair services . Doing this prevents further primary damage and secondary damage. 

Professional Expertise & Equipment is Needed to Ensure a Quality Job

Homeowners need to be careful attempting restoration because DIY processes can cause issues. Our team is available 24 / 7 to mitigate water damage. Our services include:

Providing emergency services such as tarping and containment

  • Using moisture meters, probes, and infrared cameras to track hidden moisture
  • Choosing the right pump for the job to extract the water
  • Diagnosing the correct ratio of dehumidifiers to air movers for efficient drying
  • Employing controlled demolition when necessary
  • Repairing and restoring after thoroughly cleaning
  • Leaving your residence “Like it never even happened.”

For quality water damage, repair services, contact SERVPRO of Maple Grove. You can reach our helpful staff at 763-498-6500. We’re Faster To Any Size Disaster.

The Standard Water Damage Process

5/10/2022 (Permalink)

Every water damage job is different as there are different grades of water, different amounts, different floors and contents affected, and different causes. With that being said, we maintain a standard procedure to ensure the safety of the client and this allows us to build out the best call to action for every job. 

Step 1: Emergency Contact

Cleanup and restoration begin with a phone call. We have a representative to answer your phone call 24/7/365. They will lead you through several questions to better understand your needs for the water event.

Step 2: Inspection and Damage Assessment

Our SERVPRO professional completes a detailed inspection of your property and determines the scope of the damage.

Step 3: Water Removal/Water Extraction

This step removes the majority of the water from your home or business.

Step 4: Drying and Dehumidification

Our team of professionals will manipulate temperature and relative humidity to remove the remaining moisture. Daily monitoring will occur until the materials reach an acceptable drying goal.

Step 5: Cleaning and Sanitizing

Walls, floors, and other surfaces of the property will likely need professional cleaning treatments once the area is dry. Restoring contents, odor removal, and deodorization, and sanitizing treatments occur during this step.

Step 6: Restoration

This is the final step in the process of restoring your property to its pre-water damage condition.

Call today! 763-295-1161

Water Damage Emergency Tips

5/10/2022 (Permalink)

What you can do until help arrives

After any water damage situation, your primary focus should be safety:

  • Is it safe to stay in the house?
  • Electrical and "slip and fall" hazards are some of the most prevalent concerns.
  • Only do activities that are safe for you to perform.
  • Wet materials can be VERY heavy. Be careful!

Have A Water Damage Emergency?
Call 763-295-1161

With over 1,700 Franchises nationwide, there’s a SERVPRO Professional nearby and ready to serve you.

What To Do After Flooding

  • Remove excess water by mopping and blotting.
  • Wipe excess water from wood furniture after removal of lamps and tabletop items.
  • Remove and prop wet upholstery and cushions.
  • Place aluminum foil or wood blocks between furniture legs and wet carpeting.
  • Turn air conditioning on for maximum drying in summer.
  • Remove colored rugs from wet carpeting.
  • Remove art objects to a safe, dry place.
  • Gather loose items from floors.

What NOT To Do After Flooding

  • Don't leave wet fabrics in place. Hang furs and leather goods.
  • Don't leave books, magazines or other colored items on wet carpet or floors.
  • Don't use your household vacuum to remove water.
  • Don't use television or other household appliances.
  • Don't turn on ceiling fixtures if ceiling is wet, and keep out of rooms where ceilings are sagging.

Water Tips  |  Fire Tips   |  Biohazard Tips   |  Mold Tips

Water Cleanup, Damage Repair, and Restoration

5/10/2022 (Permalink)

Related Water Services

When you are dealing with water damage, immediate action is crucial. SERVPRO franchise professionals respond immediately and use advanced equipment and techniques to remove the water quickly. They closely monitor and document the drying process to verify your property is dried properly and thoroughly.

Please refer to our Water Damage Tips - Until Help Arrives Guide and follow these tips to protect yourself and your property.

SERVPRO Franchise Professionals

  • Provide 24/7 Emergency Service
  • Highly Trained Water Restoration Specialists
  • Faster to Any Size Disaster
  • A Trusted Leader in the Restoration Industry with over 1,700 franchises
  • Preferred Vendor for Many National and Local Insurance Companies

Have Questions? Call Today 763-498-6500

Why Choose a SERVPRO Franchise Professional?

They’re Faster to Any Size Disaster

SERVPRO franchise professionals are dedicated to responding immediately to water emergencies. A fast response lessens the damage, limits further damage, and reduces cost.

3 Tips to Prevent Basement Flooding

5/10/2022 (Permalink)

Here Are Three Of The Best Ways To Avoid A Basement Flood

If you own a home with a basement in Minnesota, you've likely already thought about what to do if your basement floods. But as the saying goes, "An ounce of prevention is worth a pound of cure." Preventing basement flooding before it happens can save you time, stress and money on water damage and pipe repair. 


1. Keep Your Foundation Dry
The largest culprit behind basement flooding is a cracked foundation, as water will naturally follow the path of least resistance. Check thoroughly for any cracks that are leaking in your foundation. If you find any, repair them right away with caulk or hydraulic cement. It's also important to ensure that storm water is directed away from your foundation. If needed, you can purchase downspout extensions, which help divert the water and aid in keeping your foundation dry.

2. Check Your Windows
If you have window wells (a window that is below grade), it's easy for water to collect there and potentially lead to flooding Using window well covers can prevent this from happening. If you have any other external windows or doors in your basement, check them regularly to ensure their seals are water-tight.

3. Invest in a Flood Alarm
Flood alarms are sensors that track differences in moisture levels and are installed by your baseboards. They're perfect for smart homes, as they connect easily and alert you if it detects any flooding. This way, you can head off any potential basement flood and get a handle on it before it escalates and requires professional mitigation or pipe repair.
Keeping your basement dry is one of the best ways to protect your home and its contents. No method of prevention is foolproof, but using a combination of these and other prevention tips can greatly lessen your chances of flooding in your basement.

Give us a call today (763)-498-6500

Prevent Plumbing Disasters by Staying Proactive

5/10/2022 (Permalink)

Here Are Four Ways To Prevent Plumbing Disasters

Being proactive when it comes to plumbing problems is a great way to prevent disasters and extend the life of your business’s plumbing system. Conversely, ignoring minor signs and waiting for disaster to strike can lead to costly repairs and additional damage. If you want to save money, and perhaps save your sanity, learning how to stay ahead of your plumbing issues is especially important.

1. Find a Professional Plumber
Even before you become aware of any potential issues, it is a good idea to get the contact information of a reliable plumbing service. Knowing who to call in the event of a broken pipe or similar emergency can save you from the headache of scrambling to find one later when the need is urgent. It is also recommended to have the number of a commercial water clean-up services available, in the event of an unforeseen water disaster.

2. Schedule Routine Inspection and Maintenance
Routine maintenance is important for ensuring your plumbing system is working properly. Plumbers will advise you on proactive measures, such as upgrading old equipment that is no longer reliable. Upgrading can save you money in the long run by helping you avoid leaks and other damage.

3. Fix Small Problems
Take care of minor plumbing problems like dripping faucets and slow draining sinks before they morph into expensive issues. Dripping faucets may not seem like a bit deal, but they can run up your water bill over time.

4. Watch Your Monthly Usage
Keeping an eye on your monthly water bill can help you spot problems that go unnoticed to the naked eye. If your bill skyrockets without any explanation, you could have an underlying problem, such as a faulty pipe behind your walls or a major leak in your water main.
Being proactive is one of the most effective ways to ensure you catch plumbing problems in your building before they start. Investing the time and money to maintain a good working system will far outweigh the cost of major repairs down the road.

Give us a call today (763)498-6500

4 Essential Steps to Take When Filing a Water Damage Insurance Claim

5/10/2022 (Permalink)

4 Essential Steps to Take When Filing a Water Damage Insurance Claim

Dealing with water damage in your Maple Grove, MN home is hard enough without adding insurance policies. Unfortunately, filing an insurance claim is an essential task for avoiding monetary loss. In order to make it easier, here are four essential steps to take when you're filing a water damage claim.


1. Contact Your Insurance Providers
Ignoring the existence of your insurance company can sound tempting. However, you must stay in contact at all times. First, make sure you understand your policy completely. Call the organization if you have any questions, no matter how minor. These are some possible queries to bring up:

  • What's the timeline for filing an insurance claim?
  • What are the mandatory steps to take?
  • Will my damage be covered?


Next, make sure that your providers are taking the right steps. If you experience any problems, now isn't the time to let anything slide.


2. Document Damages
In order to prove the need for monetary reimbursement, you'll require proof. Specifically, every spot in your home that's damaged must be documented. Take photos of items with visible flood damage. When an adjuster comes, be sure the individual inspects every problematic area. This can protect you from any claims of fraud or denials of your predicament.


3. Keep Monetary Records
Another important step in getting reimbursed is documenting your financial losses. Any money spent on remediation experts and replacements should be written down and presented to your providers. If there's a way to get proof of purchase, do so.


4. Fill Out Necessary Forms
Paperwork isn't exciting, but it's vital to fill it out as quickly as possible. The sooner you get your claim done the sooner you can recover after, for instance, a pipe burst. Make sure that you fill out each form with complete accuracy.
Filing an insurance claim, while daunting, may save you a substantial amount of money. If you stay thorough at every step, your home may be back to normal in no time.

What to do When Making an Insurance Claim After Water Damage

5/10/2022 (Permalink)

Take The Following Steps If You Find Yourself In This Situation

Whether it comes from bursting pipes, a broken appliance or a leaky roof, water can cause significant damage to your Maple Grove, MN home. It can damage building materials, cause mold growth and ruin electronics. Homeowners insurance can help you pay for repairs. Take the following steps if you find yourself in this situation.

1. Call Right Away
It is important to start your insurance claim as quickly as possible. Not only will this result in completing the process sooner, but it will also help ensure that your claim isn’t affected. Some policies require you to report water damage within a certain time. If this is not done, it can reduce the amount you receive or can result in your claim being denied.

2. Document the Damage
Your insurance adjuster will need information on the areas of the house that were damaged, including whether there are bursting pipes and flooding, as well as any belongings that may need to be repaired or replaced. You should provide a list with pictures and the estimated value of included items.

3. Perform Mitigation
Mitigation is the process of preventing damage from spreading and worsening. This should be done quickly to reduce the amount of time and money needed to make repairs. An emergency cleanup and restoration company can inspect your home, fix broken pipes, remove water and repair the building along with damaged belongings.

4. Go Over Your Policy
Because individual insurance policies will vary, you should read over yours carefully. Make sure that you are familiar with anything that is required of you while making a claim as well as what is covered by your insurance. This will help the process go more smoothly.
Bursting pipes and other causes of damage can be frustrating to deal with. Making an insurance claim can also be stressful if you are unprepared. Following these steps can help you get through the situation more easily.

What You Need to Know Before Cleaning Your Drains

5/10/2022 (Permalink)

How To Clean Drains And How They Work

Few plumbing issues frustrate homeowners in Maple Grove, MN as much as a clogged drain. If your sink or toilet is draining slowly, you might consider reaching for a drain cleaner to break up the following:

  • Tangled hair
  • Excess oils
  • Soap buildup
  • Food particles

Here are some options for cleaning drains and how they work.

Chemical Cleaners
Many people are familiar with these popular drain-cleaning solutions. Harsh chemicals work on clogs by creating heat that breaks up substances that stand in the way of water flow. This option requires careful consideration. Chemicals can settle on weak, old, and heavily clogged pipes, causing them to corrode and possibly rupture, leading to flooding. If this happens, it may be necessary to contact a sewage cleaning company to clean up contaminated water.

Plungers
Anyone who has a house with old pipes might prefer using a plunger to remedy a clogged drain. When clogs are not dense or only in one location, a forceful water rush can push trapped material through the pipe to restore water flow.

Augers
These devices, also called drain snakes, are long, flexible steel cables that can reach far into drains until they contact the clogging substance. Depending on what causes the clog, the substance can either be broken apart or pulled out. It is necessary to maneuver the snake carefully to avoid damaging or puncturing a pipe.

Enzyme-Based Cleaners
Instead of chemical drain cleaners, enzyme-based products are a safer option to avoid and eliminate clogs. These products employ good bacteria that slowly and gently eat away at organic substances like hair, mold, and food.
Caring for your home's plumbing means using appropriate methods to clean your pipes and break up clogs that will inevitably form within them. If repairing a clogged drain leads to pipe damage and flooding, you can count on a professional cleaning service to dry your belongings and prevent mold spread.

For help pointing you in the right direction with any of your plumbing needs feel free to call our local office for assistance at 763-498-6500

3 Give Away Signs of Water Damage

5/10/2022 (Permalink)

Signs Of Water Damage

Even the smallest water leak is capable of costing you thousands of dollars in repairs and remediation, but the earlier you catch the issue, the sooner and more efficiently it can be fixed. Lucky for you, SERVPRO of Maple Grove, MN, is Faster to Any Size Disaster.
There are many causes of a water leak, including but not limited to:

  • Pipe break
  • The freeze/thaw cycle
  • Broken seals
  • High water pressure
  • Clogged lines

But how do you know when you need to call your local Maple Grove, MN water damage specialists?

1. Staining on Walls
Discoloration on walls or ceilings is one of the most common signs of water damage. Always look out for those mysterious-looking brown patches, and act fast if you spot one. Water staining doesn't develop overnight — the water may have been leaking for days or even weeks by the time the discoloration becomes perceptible.

2. Pricey Water Bills
If your water bill has been increasing even though your usage has remained about the same, you might be relieved to hear that this could be a sign of a pipe break or other water line malfunction. All that expensive water is going somewhere, and it's crucial to put a stop to it before it does too much damage.

3. Poor Water Pressure (or None at All!)
Another sign of a leaky pipe is a sudden change in your water pressure or no water coming out of the faucets at all. This is caused by the water draining out of the pipe break and not leaving enough water to be distributed to the rest of the system. If you encounter this issue, the water is likely gushing out in a place where you don't want it, so make sure to get help before it develops into a full-fledged flood.
By keeping an eye out for these three signs of a water leak, you might just be protecting your commercial building from a messy and costly disaster.

Biggest Reasons to Contact a Professional Water Clean-up Company After a Flood

5/10/2022 (Permalink)

Have you detected a water leak somewhere in your residential or commercial building? Don't disregard this or think it will go away on its own. If you neglect this seemingly minor issue, it could easily turn into something much worse. Water damage often occurs over a long period of time, sometimes without you even noticing it. Of course, in other instances, flooding happens all at once following a natural disaster or plumbing emergency. No matter what causes these incidents, make sure you enlist the expertise of a professional to help you clean up.

Potential Consequences of Flooding

Water can infiltrate your office because of broken pipes, due to a backed-up sewer or after heavy rains. Any of these events can create problems for your business. Some of the following effects can result:

  • Damage to documents, electronics and other important materials
  • Damage to the structure of your building
  • Damage to carpet or furniture
  • Disruption of business operations or the need to relocate to another facility.

The Pros Have Experience

With SERVPRO of Maple Grove you get a reputable professional water cleanup company. We are one of the best companies in the area with a proven track record of helping businesses of any size deal with water problems. With experience comes keen knowledge of how to effective tackle this type of emergency. There is no guesswork involved; instead, the company will use best practices and sound tactics to clean up the water, sanitize the affected area and rebuild where necessary.

The Pros Have the Tools

For most water damage cleanup, only heavy-duty equipment will be successful against the size of the flooding problem. Professional water mitigation specialists use high-powered tools such as water extractors, fans and sanitizing agents to ensure your workplace is once again safe and comfortable.
Water damage doesn't have to derail your business for the long term. When you choose the right specialists, you can overcome this type of incident quickly and completely.

Give us a call today (763)498-6500

Prevent Damage to your Home by Flushing the Water Heater

5/10/2022 (Permalink)

Follow The Below Steps To Keep Your Heater Working Well

Sediment can build up in your water heater over time and damage the appliance. The heater may even malfunction completely, causing a flood that necessitates cleanup and restoration specialists.
Luckily, there is an easy way to maintain your heater. You just have to perform a regular water heater flush. The process is simple, and all you need is a drainage area, a hose, and a screwdriver. Follow the below steps to keep your heater working well for years to come.

1. Turn Off the Heater
Gas heaters can be turned off by extinguishing the pilot that controls the device. If you have an electric heater, you can power it down via the circuit breaker.

2. Attach the Hose
Next, connect one end of the garden hose to the drain valve of the water heater. The other side of the hose should be placed in an area that won't be harmed by excess sediment and warm water.

3. Drain the Water Tank
Start by opening the drain valve of the heater and allowing the water to flow for several minutes. To speed up the process, you should then turn on the hot water faucet in your kitchen. Wait a few more minutes before turning off the water supply valve. This should cause the flow of water to cease. You may want to do another quick flush before closing the valve again.

4. Turn On the Water Supply
After the sediment and water have been drained from the heater, close the valves for good and turn on the water supply. To make sure the tank is full, check to see when the water is flowing smoothly from the kitchen faucet.

5. Turn On the Power
Once the tank has filled up with water, you can restore power to the heater. Don't forget to turn off the kitchen faucet, as well.
Flushing your water heater allows the appliance to work properly. It is a simple step you can take that prevents long-term damage to your Maple Grove, MN home.

Give us a call today (763)498-6500

5 Tips for Drying Water Damage

5/10/2022 (Permalink)

Five Damage Tips for Mitigation

Water can cause extensive damage to a commercial building within a matter of hours. Standing water and residual moisture should be extracted and drying methods used to avoid secondary damage, such as mold growth. Here are five of the most important damage tips for mitigation and cleanup.

1. Extract Standing Water
Eliminating standing water with portable pumps or a wet vac is the first step toward addressing water damage. Water damage mitigation professionals can perform a fast and thorough extraction and provide cleaning tips for building materials and contents.
2. Increase Airflow
Restoration specialists may recommend the use of ventilation equipment such as air movers or fans to promote drying. Ventilation is an ideal drying method after a pipe burst introduces clean water into a structure. Areas exposed to contaminated water for long enough for mold to start forming may be an exception, as circulating air can spread spores.
3. Consider Heated Methods
Heat may be helpful for expediting drying in some situations. The degree of contamination, duration of damage, and affected materials are essential considerations for determining the best drying methods. Restoration experts can offer case-specific damage tips.
4. Lower Humidity Levels
Reducing residual moisture levels in the air and porous or semi-porous materials is helpful after any type of water damage. Mold needs moisture and food sources to flourish. A combination of cleaning, disinfecting, and lowering humidity discourages fungi from growing.
5. Wait Until Drying Is Complete
Rebuilding or restoration should not begin until the portion of a structure that has suffered water damage has been cleaned, disinfected, and thoroughly dried. This includes replacing any building materials torn out due to contamination.
Lowering moisture levels within 24 to 48 hours after water damage is essential for avoiding mold. Trained water damage professionals can quickly extract water and recommend the best damage tips for a building in Maple Grove, MN.

Frozen Minnesota Pipes

5/9/2022 (Permalink)

As we know, overnight temperatures drop below freezing still here in March. SERVPRO of Wright County offers these cold weather tips:

Know the location of your water shut-off valve and test it regularly.

If a pipe breaks, you won't want to have to find it then or, worse, wait for someone to arrive at your place to find it for you. In most single-family homes, the shut-off valve is in the basement or the crawl space on a wall facing the street.

Turn off outdoor faucets, and be sure to disconnect hoses from them.

Ensure the faucet and the outside portion of the pipes are fully drained. A valve inside many houses will shut off the water's flow; then open and close the tap outside to release any water in the pipe. Disconnect the hose to ensure that freeze-proof faucets will drain and to avoid damage to the hose from freezing water.

Winterize unheated or vacant buildings.

If your vacant building has a fire protection system, make sure there is no danger that the water servicing this system might freeze.

Insulate water pipes that may be vulnerable to the cold or have caused problems before.

Pipes close to exterior walls or in unheated basements can be wrapped with pieces of insulation. Never put heat tape on the water meter to avoid damaging plastic components of the meter.

Call Us Today!

763-295-1161

Franchises are independently owned and operated.

Sump Pump Failure Causes

5/9/2022 (Permalink)

Power Failure

Your primary sump pump should not be treated any different than any other appliance in your home - without power, it is completely worthless.  As a safeguard, invest in a high quality battery back-up sump pump.   A battery kept continually charged by the backup system operates a separate pump linked to the discharge pipe, providing you hours of protection until power is restored. Some backup pumps even monitor the condition of the battery and alert you when it needs to be replaced.

Frozen Discharge Pipe

If the discharge pipe is not installed pitched properly, water will collect and eventually freeze, causing a blockage. 

Switch Stuck in Place

There are several different types of sump float switches.  Vertical and tethered floats are the most common.  Vertical floats seem to work the best as tethered floats are known for  getting stuck on the side walls of the sump pit (resulting in a flooded basement). 

Over-worked / Under-Powered Sump Pump

Not all pumps are created equal.  Make sure you install the correct horsepower pump capable of keeping up with your flow of water.   

Old Age

It is generally recommended that sump pumps should be replaced every five to seven years in order to be reasonably safe. Don’t wait until it’s too late!

Have a water damage from a sump pump failure? Call SERVPRO of Wright County at (763) 295-1161

Water Heater Water Damage

5/9/2022 (Permalink)

Have you inspected your water heater lately? SERVPRO of Maple Grove has been restoring water damage for Minnesota residents for years, and we know that routine inspection and maintenance of water heaters and plumbing systems can prevent major water damage in many cases. Here are some tips from the Insurance Institute for Business and Home Safety for inspecting and maintaining your water heater:

  • Inspect your anode rod every two years, or every year once the warranty has expired, to determine if it needs replacement
  • Flush water heater tanks every six months to remove any sediment by attaching a garden hose to the valve at the base. For safety, first, turn off the power and run the hot water until it is cool.
  • Get an annual inspection from a plumbing professional, including the shut-off valve and all piping. Signs of broken valves and loose or wet joints and rust are a sign that more severe damage is coming.

Call Us Today!

Water damage can happen at any time of the day or night. When you have a water damage emergency in your home or commercial business, we are Here to Help. The professionals at SERVPRO® of Wright County are here to restore your water damage, “Like it never even happened.” Call us today at 763-498-6500

Franchises are independently owned and operated.

What to do if a Pipe Breaks

5/9/2022 (Permalink)

A pipe break calls for fast action. Mitigation, repair, and restoration are critical to limit the extent of primary and secondary damage. The following measures can help homeowners minimize the severity of water damage caused by bursting pipes.

Limit Damage

Water originating from a broken supply line is likely to be clean and treated. Limit damage by:

  • Shutting off the water main
  • Collecting water in a trash can with wheels or other containers
  • Puncturing a swollen ceiling and draining water into a container

These methods can limit the amount of damage sustained by a ceiling, wall cavity or home interior.

Avoid Electrical Hazards

Homeowners should steer clear of other hazards between stopping and fixing a leak. Avoid making contact with nearby:

  • Plugged-in appliances
  • Electrical fixtures
  • Wiring

A homeowner can shut off the power at a breaker box. If you are not sure about the safety of this measure, contact an electrician or power company.

Contact a Plumber

Call a plumber to fix broken pipe. Keep the water supply turned off and continue collecting residual water until the plumber arrives. A homeowner may use:

  • Mops
  • Towels
  • Wet-Vac

Remove as much water as possible to limit the extent of the damage. Residential damage mitigation experts can complete this process with professional equipment.

Dry the Area

Depending on the extent of damage caused by bursting pipes, a homeowner may want to contact a mitigation and restoration service. Promoting fast drying is crucial. Specialists recommend using:

  • Air movers
  • Fans
  • Dehumidifiers

This equipment can shorten drying times and prevent mold growth. If you do not have access to these appliances, hire a damage mitigation service.

Homeowners should act quickly in response to a broken pipe. Water damage mitigation and restoration professionals can clean up damage caused by bursting pipes in a timely manner and prevent secondary damage from occurring.